← Back to blog

Emergency Electrical Repairs: What to Do and Who to Call

November 21, 2026
Emergency Electrical Repairs: What to Do and Who to Call

If you can smell burning, see sparks or scorch marks, or have lost power to part of your home, make the supply safe first and get a registered electrician to look at it. Do not try to fix it yourself. The steps below are the ones that fire services, electrical safety bodies and the network operators give, in the order to do them. We have added what the repair involves afterwards, so you know what a proper job looks like once the danger has passed. We are Browns Electrical, a family-run electrical firm in Dudley, and in our work the electrician who quotes the job also carries it out.

Browns-electrical
Get Electrical Faults Checked Safely
Browns Electrical handles domestic and commercial electrical work in Dudley, including repairs, rewiring and installations with certification.
Visit

TL;DR

  • Burning smells, sparking, hot or scorched sockets, exposed wiring and shocks from fittings are warning signs. If there is fire or immediate danger, get out and call 999.
  • If it is safe to reach, switch off the supply at the consumer unit (fuse box), unplug suspect appliances and leave damaged fittings alone.
  • A power cut across the street is a network matter: call 105. A fault inside your home is for a registered electrician.
  • Agree how the bill is worked out before work starts, and ask for written pricing. Trading Standards warns that emergencies lead to rushed decisions.
  • After the repair, expect a certificate showing the work meets BS 7671, the UK wiring standard.

Table of Contents

What counts as an electrical emergency

Not every electrical problem is an emergency. NICEIC's Technical Director, Paul Collins, said in April 2026 that warning signs such as burning smells, sparks or visible damage should never be ignored. NICEIC is one of the bodies that registers electricians in the UK. The Electrical Safety Roundtable gives a fuller list of dangerous signs around sockets, switches and other accessories:

  • an electric shock when you touch something
  • exposed copper conductors
  • burn marks
  • a fishy smell
  • yellow discolouration
  • buzzing

In plain terms, treat these as urgent:

  • Smoke, flames or a hot burning smell from a socket, switch, appliance or the consumer unit.
  • Sparking or crackling when you plug something in or switch it on.
  • Scorched, melted or discoloured sockets, plates or plugs.
  • Exposed or damaged cable, for example after a drill or nail has gone through a wall.
  • Shocks or tingling from a fitting, tap or appliance.
  • Water near electrics, such as a leak above a light fitting or a flooded socket.

These are usually urgent but not dangerous in themselves, and can be handled the same day or as soon as an electrician can attend:

  • a circuit that trips repeatedly
  • a trip switch that will not reset
  • lights that flicker on one circuit
  • half the house with no power while the rest works

They still point to a fault somewhere. If a switch trips, do not keep forcing it back on.

What to do in the first few minutes

The order matters. These steps pull together the advice from NICEIC, the Electrical Safety Roundtable and Cambridgeshire Fire and Rescue Service.

  1. If there is a fire, get out. Get everyone out, stay out and call 999. Never use water on an electrical fire. If you can do so safely, pull the plug or switch off the power at the fuse box.
  2. Check whether it is a wider power cut. Look at whether neighbours and streetlights have lost power. If they have, the fault is not in your home. See the next section.
  3. Switch off at the consumer unit. This is the box with the switches, usually near the front door, under the stairs or in a utility room. Turn off the main switch only if you can reach it without standing in water or touching anything damaged. If you cannot do it safely, leave it and call 999.
  4. Unplug suspect appliances. Only if the plug and socket are undamaged and dry.
  5. Do not touch damaged sockets or exposed wiring. Keep children and pets away. Do not tape it up or try to tidy it.
  6. Do not attempt repairs. NICEIC is clear that you should not try to fix the problem yourself. Cornwall Housing's resident guidance notes that DIY attempts account for half of significant electric shocks.
  7. Call a registered electrician for anything that looks like a fault in your own wiring or fittings.

If a trip switch has operated on one circuit, you can check whether an appliance on that circuit caused it. Unplug everything on the circuit and reset the switch once. If it trips again with nothing plugged in, leave it off and book an electrician. Our guide to what an RCD does explains why these switches trip and why they matter.

Who to call: 999, 105 or an electrician

The right call depends on where the problem is.

999 is for fire, serious shock, or anyone in immediate danger. Tell them electricity is involved. The Energy Networks Association's safety leaflet advises dialling 999 in an emergency and 105 for a safety concern about the electricity network, such as damaged overhead lines, underground cables or substations.

105 is the free number for power cuts and network faults. The British Red Cross explains that you can report a power cut by calling 105 or your local network operator. Before you call, check your neighbours and your fuse box for a tripped switch. If anyone in your household is on the Priority Services Register, use the number you were given. The 105 service connects you to the network operator for your area, whoever your energy supplier is.

A registered electrician is for anything on your side of the meter: sockets, switches, lights, circuits, the consumer unit and fixed appliances. Energy Assets sets this out simply: the network operator deals with its own equipment, the supplier with the meter, and a certified electrician with customer-owned equipment. If you rent, tell your landlord or housing provider straight away as well, because they are responsible for the fixed wiring.

Which electrical emergency service to contact

If you live in or near Dudley, Tipton, Bilston, Kingswinford, Wombourne, Stourbridge or Wolverhampton, our electrical repairs page shows what we handle for homes in the area.

Making safe is not the same as fixing it

An electrician arriving at an urgent job usually does two things in order. First they make the installation safe: isolate the faulty circuit, remove a damaged fitting or cap off exposed cable so the rest of the house can be used. Then they find the cause and repair it properly. Sometimes both happen on one visit. Sometimes the second needs materials, a second visit, or a bigger decision from you.

That second stage is where homeowners get caught out. A scorched socket may simply be a loose terminal, or it may be a sign of an overloaded or ageing circuit. Repeated tripping may be a single faulty appliance, or damaged insulation somewhere in the wall. Finding out is the job of fault finding: testing circuit by circuit until the cause is located, rather than replacing parts and hoping.

Some common causes, and what they usually lead to:

ProblemCommon causeTypical outcome
Scorched or hot socketLoose connection or overloaded circuitReplace the accessory, test the circuit, check the cable
Circuit keeps trippingFaulty appliance or damaged cableIsolate, test insulation, repair or replace the circuit section
Whole consumer unit trips or smells hotFailed device or loose connectionMake safe, then repair or replace the unit
Lights flicker across the houseLoose neutral or main connectionUrgent inspection, possibly a call to the network operator
No power to one roomFailed fitting or broken cableFault find, repair, test

If the underlying issue is an old, overloaded consumer unit, replacing it is often the lasting fix. Our consumer unit upgrade page explains what that involves. In an older property where fault after fault keeps appearing, the wiring itself may be the real problem. Our electrical safety checklist for older homes and our guide to full house rewiring cover the signs and the process.

What an emergency electrician costs

Prices vary widely, so there is no single figure to expect. Two published pieces of evidence show the range.

A 2026 census of 31 UK firms found a median standard-hours minimum call-out of £92 among the 20 firms that published prices. Those prices ranged from £30 for attendance only to £171 plus VAT for the first hour. Out-of-hours work added roughly a third on top, with a typical minimum of £120, and 29% of firms advertised no call-out fee. These are published figures for one survey, not a quote for your job, and what you pay depends on the time of day, the distance, the fault and the parts.

Trading Standards at Staffordshire County Council, which covers areas next to Dudley, issued a warning in August 2026 urging people to "Take Five" before agreeing to emergency call-outs. Their checklist is worth following even under pressure:

  • Ask whether there is a call-out charge and whether travel costs apply.
  • Ask how the final bill will be calculated.
  • Question any recommendation for extra work.
  • Ask for pricing in writing.
  • Keep quotations, invoices and receipts.

The same notice says complaints show some people faced bills far higher than expected, or agreed to extra work without understanding the cost. A good rule: once the danger is dealt with, you are entitled to a clear price for the repair before it starts.

At Browns Electrical, work is quoted by the electrician who then does it, so the person explaining the price is the person who has looked at your fault.

What an emergency electrician costs

How to check an electrician is properly registered

Urgent situations make it tempting to accept the first person who answers. A two-minute check is still worth it.

Electrical Safety First lists the government-approved registration bodies for England and Wales: NICEIC, NAPIT and BFC. Registered electricians work to BS 7671, are regularly assessed and are insured. Its 2025 guidance adds that they issue a safety certificate for the work. You can also check an electrician's registration on the Competent Person Scheme register that the Electrical Safety Roundtable points to.

BS 7671 is the standard that all UK electrical installation work is measured against. The IET, which publishes it, states that the transition period for Amendment 2 ended on 15 October 2026, and that BS 7671:2018+A4:2026 is now the current edition for new installation work and certification. Work we carry out is certified to current BS 7671 standards, and we are an approved Ohme installer for EV chargers.

If you have been unlucky with earlier work, the Electrical Safety Roundtable advises giving the original electrician the chance to put it right first. If they refuse, their scheme operator can step in. Where the electrician is unknown, a registered electrician should be brought in to make the installation safe.

If you are a landlord

In England, the electrical safety rules for rented homes now cover social housing as well as private lets. The government's guidance says the 2020 regulations were extended to the social rented sector, taking effect on 1 November 2025 for new tenancies and 1 May 2026 for existing ones. Landlords must arrange inspections at least every five years and give tenants the report. If a report calls for remedial work, it must be done within 28 days or sooner if the report says so, as the regulations set out. An urgent fault found between inspections is the same: make it safe at once, then repair and certify it. Our guide on how often electrics should be inspected covers the routine side, and our fault finding page for homes and rental properties explains how we trace faults.

Business premises have their own duties. Our commercial electrical services cover inspection and testing, planned maintenance and distribution, which is how most commercial faults are avoided in the first place.

After the emergency: a repair you can rely on

Once the immediate danger has passed, ask for these things:

  • A clear explanation of the cause, in plain words, not just a list of parts.
  • A written quote for any repair beyond making safe.
  • Testing after the repair, so you know the circuit is sound.
  • A certificate for the work, issued to current BS 7671.
  • Advice on the rest of the installation, if the fault points to ageing wiring or an old consumer unit.

If your installation has an RCD, Electrical Safety First recommends testing it every three months using the test button. If it does not switch off or reset, get advice from a registered electrician.

How we can help

We are a family-run electrical firm covering Dudley and the surrounding towns, and our domestic work includes repairs, fault finding, consumer unit upgrades and rewires. The electrician who quotes your work is the one who carries it out, and the job is planned around your home and completed with certification to current BS 7671 standards.

Browns-electrical

If you have had a scare, or a fault keeps coming back, start with our electrical repairs page, or get in touch through the Browns Electrical website to talk through the job and get a quote.

FAQ

Who do I call for an electrical emergency?

Call 999 for fire, serious shock or immediate danger, and tell them electricity is involved. Call 105 for a power cut or damage to the electricity network. For a fault in your own wiring, sockets or consumer unit, call a registered electrician.

What counts as an electrical emergency?

Burning smells, sparks, scorched or hot sockets, exposed wiring, shocks from fittings and water near electrics are all treated as urgent by safety bodies. A circuit that trips repeatedly is less dramatic but still needs an electrician to find the cause.

How much does an emergency electrician cost?

It varies by firm, time of day and fault. A 2026 survey of 31 UK firms found a median standard-hours minimum call-out of £92, with out-of-hours work costing more. Ask how the final bill is calculated and get pricing in writing before work starts.

Should I turn the power off myself?

Only if you can reach the consumer unit safely, without touching anything damaged or standing in water. Switch off the main switch, unplug suspect appliances if the plug is undamaged, and leave everything else alone. If you cannot do this safely, call 999.

Call Browns Electrical
+44 7437 106825
Discuss an Electrical Emergency
Call Browns Electrical

Sources

Made with BabyLoveGrowth's AI